A4. Demonstrate knowledge of the causes and effects from shorts, grounds, opens, and resistance problems in electrical/electronic circuits

I have demonstrated knowledge of the causes and effects from shorts, grounds, opens, and resistance problems in electrical/electronic circuits. I have accomplished this by going to class and using snap circuits to learn about circuits and how opens, shorts, grounds, and high resistance works.

A3. Demonstrate proper use of a digital multimeter (DMM) when measuring source voltage, voltage drop (including grounds), current flow, and resistance.

I have demonstrated proper use of a digital multi meter by filling out task sheets in class and by honing my knowledge with the snap circuits. I have measured source voltage, voltage drop including grounds, current flow, and resistance.

-Voltage               

Amperage                                                        Resistance

A1. Research applicable vehicle and service information, vehicle service history, service precautions, and technical service bulletins.

I have learned how to research applicable vehicle and service information, how to look up vehicle service history, and service precautions, and technical service bulletins. I have done this by looking up specs and service information on All-Data and Pro-Demand. I have done these things during class while filling out task sheets. I also had All-Data software at auto tech at my high school so I am very familiar with finding specs service history and all that good stuff.

All-Data                                                                      Pro-Demand

A2. Demonstrate knowledge of electrical/electronic series, parallel, and series-parallel circuits using principles of electricity

I have demonstrated knowledge of electrical / Electronics series parallel and series parallel circuits using principles of electricity. I have done so by performing the ohms law lab and the series circuit lab.

I also demonstrated proper use of a DMM when measuring source voltage, voltage drop, current flow and resistance through the labs. I did this by measuring all of the above through math and measurement with a DMM.